55687円 Rustoleum Athletic Field Striping Machine 206346 車&バイク バイクパーツ バイク外装パーツ Rustoleum Athletic Field ギフ_包装 206346 Machine Striping Rustoleum Athletic Field ギフ_包装 206346 Machine Striping www.koepota.jp,Rustoleum,/faggery314559.html,Striping,車&バイク , バイクパーツ , バイク外装パーツ,Athletic,206346,Field,Machine,55687円 55687円 Rustoleum Athletic Field Striping Machine 206346 車&バイク バイクパーツ バイク外装パーツ www.koepota.jp,Rustoleum,/faggery314559.html,Striping,車&バイク , バイクパーツ , バイク外装パーツ,Athletic,206346,Field,Machine,55687円

Rustoleum Athletic Field メーカー直送 ギフ_包装 206346 Machine Striping

Rustoleum Athletic Field Striping Machine 206346

55687円

Rustoleum Athletic Field Striping Machine 206346

商品の説明

RUST-OLEUMの専門家によって提供される塗料のストライプマシンは、逆さまのストライプエアロゾルと使用するために特別に設計されています。 汎用設計を採用し、使いやすいツールはほとんどのブランドにフィットします。 優れたパフォーマンスのために作られ、迅速かつ簡単に直線を作り出し、2インチから4インチまでのサイズの範囲を広げます。 非常に便利、便利な収納コンパートメントを備えています。最大12個の余分な缶を収納でき、折りたたみ可能なハンドルで、収納が簡単です。

Rustoleum Athletic Field Striping Machine 206346

We used to rent one of these after sealcoating our church parking lot. All of the rental centers in our area stopped renting them out. We tried doing some lines with homemade cardboard stencils, but it was very time consuming.Out of the box, I had to adjust the cable. It wouldn't spray paint with the factory setup. It works like a bicycle brake or gear cable. The fine tuning adjustment wasn't enough, so I had to loosen the nut and tighten the cable quite a bit to get it to work, but that only took 5 minutes.It does the job. I think it will last forever, it seems to be very sturdy steel construction. Easily compatible with the Rustoleum inverted spray cans, they just pop in and out, and are held securely in place. If you make a starter line of some kind, either with a chalkline, or using fishing line and two weights like I did, it's not hard to do good straight lines. I had no trouble with a little math even doing angled hash marks, etc.My only complaint is that when it's adjusted high enough to get full width lines (about halfway up), the lines come out a bit fuzzy at the edges. I guess the only way to cure that would be to put wide tape to mask it, which kind of defeats the purpose of saving time. Maybe some sort of guard could be on there to redirect paint, but I'm afraid that would collect paint and start to drip.I'm a perfectionist, and had to accept that the lines weren't going to have crisp edges like something I'd paint indoors. It is after all, just a parking lot, which is going to get driven on, snowplowed, have mudpuddles, etc., and from the street it looked perfect.
I have bought a number of these machines for our youth soccer league (AYSO). As painful as it is to line fields, these machines minimize the wear and tear on the field liner. The mechanism that grabs onto the paint can is sturdy and applies enough force so that the paint emerges in a thick solid line, and a parent volunteer can easily polish off an entire field in under 30 minutes, including the center circle and PK marks.Despite the fact that our machines are used by volunteers and may not always receive the tender loving care they deserve, they hold up for years and they die slowly, giving you plenty of time to order a replacement.
I needed to re-stripe the parking area of an apartment building. I called a contractor and received a quote that was outrageously high. I decided to buy the striping machine and do it myself. I did need to adjust the trigger cable, but otherwise the machine worked great, and the job came out fine. Here's a tip: you can make a really straight line by lining up a 2 x 4 piece of wood parallel to the line you want to make, and exactly 6 1/2 inches from the center of the line you want to paint. You might want to duct tape the 2 x 4 to the surface so that it doesn't move. Then place the wheels of the striping machine against the edge of the 2 x 4 and roll the machine along the 2 x 4 to make the line. Of course, as you gain confidence, you can roll a straight line without the 2 x 4 as a guide.
This is a simple product but it didn't work at first. The cord that extends the metal tab under the unit to push on the nozzle did not reach the nozzle. So, I had to rig it up to make it reach. I would've sent it back but didn't have time because I was on a job site and needed it to work. I made some minor adjustments myself and had it working. But, I would not be able to resell it because it doesn't function normally. Equivalent to a car without a windshield so you wear a helmet to make it work, but you get to where you need to go.If you buy the unit, use a test can prior to going on a job site. If it doesn't work, you can pull the cord up over the ledge of the hole so it sticks, giving you about the extra 1/2 inch of distance when you pull the handle so that the machine pushes the nozzle.

『裏切られたので王妃付き侍女にジョブチェンジ!』、他8作品更新!

次回更新は

最近発売のコミックス書籍

前回までの更新

『異世界でも無難に生きたい症候群』、他14作品更新!

『迷宮ブラックカンパニー』、他13作品更新!

2021 12 月号 配信!

『めっちゃ召喚された件 THE COMIC』、他6作品更新!

『魔導の系譜』、他9作品更新!

『侯爵嫡男好色物語 ~異世界ハーレム英雄戦記~』、他11作品更新!